|
|
|
|
Square Tape Clamp Manufactured in Gunmetal, aluminium or naval brass. Suitable for 4-way connections as shown for making 'T' joints in a continuous network of conductor tapes. The clamp has a countersunk hole in the base for securing in position. The clamp lid is secured by 4 roundhead or countersunk screws.
Rectangular Test or Rectangular Box Clamp Manufactured in gunmetal or aluminium, the clamp is designed to join a range of tape sizes 20 x 3 mm to 50 x 6 mm.
Plate Type Test Clamp Manufactured in gunmetal or aluminium this clamp is used to form a disconnecting joint between the down conductor system and the earthing system of a lightning conductor installation. This clamp can also be used as a 4 way clamp.
Screw Down Test Clamp. Manufactured in gunmetal, installed and used in place of a plate type test clamp where required.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Send mail to sales@radiostructures.co.uk with questions or comments about
this web site.
|